Remove HDD Repair

What is HDD Repair?

HDD Repair is also known as Smart HDD, S.M.A.R.T. Virus or S.M.A.R.T. Check; all from the very same malware family Win32/FakeSysdef. It is a bogus software program that creates disturbing redirection errors. Typically you will have the ability to figure out if your pc is attacked with HDD Repair when you view an error that states "A Severe Hard drive Error Writing Drive C: /" alert on your display. Likewise, it will remove all your shortcuts and save them in your temporary folder (% Temp % smtmp), so that none of them will show up on your start menu, this way you will not have the ability to start any type of application from the start menu, making you believe that your system has major problems.

Some HDD Repair screenshots:
HDD Repair

This bogus software program is typically from corrupted websites that you could have visited or from malware software program that you have actually downloaded. HDD Repair will immediately invade your system and will generate untrue alerts and pop ups that state your system has actually been threatened by a severe infection or there are hard disk problems identified. It will recommend you to stop making use of the trial version and pay for a certified complete version of HDD Repair to activate threat elimination features however once you click "Buy license now" you will put your private as well as financial details at risk.

Some of the HDD Repair fake security alerts and warnings that users may get:
Hard Drive Boot Sector Reading Error During I/O system initialization, the boot device driver might have failed to initialize the boot device. File system initialization might have failed because it did not recognize the data on boot device.
System blocks were not found This is most likely occurred because of hard disk failure. This may also lead to a potential loss of data.

HDD Repair could make use of a TDSS rootkit to shield and disguise its malware data, and to prevent you from starting any sort of anti-malware software program, therefore making itself even more difficult to remove. There are bogus registration codes to stop irritating pop ups however these will never ever get rid of the bogus application. You must utilize a trusted anti - malware and anti spyware application to get rid of this threat. You also have to run a complete system scan to identify any sort of damages that HDD Repair has actually created.

Associated HDD Repair System Entries and files

HDD Repair Processes

HDD Repair Files

HDD Repair Registry Entries


How to Stop HDD Repair Fake Alerts

To register HDD Repair and stop its fake warnings, use the following fake license key.

HDD Repair registration code: 8475082234984902023718742058948 then Click on Help & Support button.

NOTE: this code will NOT remove HDD Repair from your computer, it will JUST stop the annoying alerts and messages.


HDD Repair Removal Instructions

Step 1: Reboot in Safe Mode with Networking

To restart your computer in Safe Mode with networking:

  1. Restart your computer.

  2. When you see the computer manufacturer's logo, press and hold the F8 key.

  3. On the Advanced Boot Options screen, use the arrow keys to highlight Safe Mode with Networking, and then press Enter.
    Safe Mode with Networking Screen

  4. Log on to your computer with a user account that has administrator rights.


Step 2: Disable HDD Repair Proxy Server

HDD Repair may add a proxy to its package. Its goal is to get the information through the Web connection (password etc).
It also helps to block the connection to certain sites (eg malware removal help sites) or to block the download of trustworthy antispyware and antivirus programs.

The following steps reset the Internet Explorer proxy settings in the Windows registry so that you can access the Internet again:

  1. Click Start, and then click Run. (Keyboard Shortcut: Windows logo + R)

  2. Copy and paste or type the following text in the Open box in the Run dialog box:

    Run dialog box

  3. Click OK.

  4. click Start, and then click Run.

  5. Copy and paste or type the following text in the Open box in the Run dialog box:

  6. Click OK.

Now that you have disabled HDD Repair proxy server, you will be able to browse the web again with Internet Explorer.

  1. Click Start, and then click Run. (Keyboard Shortcut: Windows logo + R)

  2. Type in iexplore.exe.
    Run iexplore.exe


Step 3: Remove the HDD Repair rootkit

HDD Repair may be bundled with the TDSS rootkit. A rootkit is a program that hides the presence of malware in the system.
Kaspersky offers a free utility, TDSSKiller, that removes malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon).

So to find out if your system is infected with any rootkits that make HDD Repair hidden and very difficult to remove, follow the steps below:

  1. Download Kaspersky TDSSKiller to your desktop from the following link:
    Kaspersky TDSSKiller Download link

  2. HDD Repair may block all executable files, so when you launch the TDSSKiller file, it will execute itself.
    So Rename tdsskiller.exe to tdsskiller.com or winlogon.exe or iexplore.exe
    Rename tdsskiller.exe

  3. After you run TDSSKiller (or the renamed version), in the welcome screen click on Start Scan.
    Kaspersky TDSSKiller Start Scan

  4. TDSSKiller will now scan your computer.
    Kaspersky TDSSKiller Scan Progress

  5. If any infection was found, TDSSKiller will display a screen results like the following one:
    Kaspersky TDSSKiller Scan Results
    Then click on the Continue button and TDSSKiller will clean the infections.

  6. A reboot might require after disinfection. In this case, click on Reboot Computer
    Kaspersky TDSSKiller Reboot Computer

  7. After the reboot, start your computer again in Safe Mode with Networking and then disable any HDD Repair Proxy Server (See Step 1&2).


Step 4: Stop HDD Repair processes

In order to stop HDD Repair from interfering with our removal procedure, we need to end and kill its processes. For this, we will use a FREE powerful utility called RogueKiller.

RogueKiller (by Tigzy) is a tool written in C++, which scans the running processes, and kills those which are malicious. This tool was developed based on speed execution, which will clean the running processes before being killed.

To terminate HDD Repair process:

  1. Always in Safe Mode Download RogueKiller to your desktop from the following link:

    RogueKiller Download link
    RogueKiller Setup Icon
    RogueKiller is a portable application, so you don't need to install anything.

  2. HDD Repair may block all executable files, so when you launch the RogueKiller file, it will execute itself. So Rename RogueKiller.exe to RogueKiller.com or winlogon.exe or iexplore.exe

  3. At this point a "pre-scan" will complete and stop any malicious process. Also a list of options will appear along the right-hand side.
    RogueKiller Pre-Scan


Step 5: Remove HDD Repair registry keys

To remove HDD Repair malicious registry entries, we will need RogueKiller again.
RogueKiller also checks for rogue Registry entries, rogue drivers, and Master Boot Record (MBR) issues, so rootkits will be cut.
RogueKiller can also fix and restore a Host file, delete any Proxy entries, repair shortcut problems and unhide files.

CAUTION: This tool is not for beginners. In this step we will ONLY use the Registry tab.

To Delete HDD Repair Registry entries:

  1. Always in Safe Mode run a scan, open RogueKiller and click on Scan.
    RogueKiller Scan Progress

  2. After a while, you should see a screen with scan results like the following one:
    RogueKiller Scan Results

  3. Click on the Registy tab, then click on the Delete button.
    RogueKiller Delete Registry Entries


Don't Reboot you computer yet, please stay in Safe Mode.


Step 6: Remove HDD Repair files

Malwarebytes Anti-Malware is simply the best known FREE malware removal tools online.

To remove HDD Repair files:

  1. Download Malwarebytes to your desktop from the following link:
    Malwarebytes Anti-Malware Download link
    MBAM Setup Icon

  2. Just Follow the easy setup process. Do not make any changes to the default settings
    When the setup is finished, make sure you leave both the Update Malwarebytes Anti-Malware and Launch Malwarebytes Anti-Malware checked.
    You can check or uncheck the Enable free trial of Malwarebytes Anti-Malware PRO as the malware removal is FREE.
    Then click on the Finish button. If Malwarebytes prompts you to reboot, please do not do so.
    Malwarebytes Anti-Malware Setup Wizard

  3. When Malwarebytes is launched, it will ask you to update the databse. Just click OK.
    Malwarebytes Anti-Malware Updating

  4. On the Scanner tab,select Quick scan and then click on the Scan.
    Malwarebytes Anti-Malware Quick Scan Screen

  5. When the scan is finished a message box will appear, click OK to continue.
    Then the screen results will show the various malware infections including HDD Repair that Malwarebytes has found on your computer.
    the image below is just an example, your results will be different.
    Click on the Remove Selected button.
    Malwarebytes Anti-Malware Quick Scan Results Screen

  6. After Malwarebytes has finished the removal of HDD Repair, you will get a message stating that you need to reboot your computer.
    Just Do so, and restart your computer in Normal Mode.
    Malwarebytes Anti-Malware Quick Reboot Message


Step 7: Unhide your files

As HDD Repair is from the family of FakeHDD, it will make you shortcuts unsuable and hide your files from your desktop, Start menu and discs.

To Fix this issue:

  1. In Normal Mode run a RogueKiller scan.

  2. When the scan is complete, go to the Shortcuts tab, and click on the Fix Shortcuts button on the right.
    RogueKiller Unhide Fix


Step 8: Check for any HDD Repair left over

To make sure that your computer is now completely free of HDD Repair, redo a Malwarebytes scan in Normal Mode.
After your are finished, Reboot your PC as asked by Malwarebytes anti-malware.


About

Sarah MelbenchI am Sarah Melbench and I am an Anti-Malware Enthusiast! I created this website to spread the word about the lastest malware infections. I write guides and tutorials about malware removal as well as reviews of anti-malware programs.Follow me on G+

Tagged with: ,
Posted in Manual Malware Removal

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>